Offensive strokes
Hit
A direct hit on the ball propelling it forward back to the opponent. This stroke differs from speed drives in other racket sports like tennis because the racket is primarily perpendicular to the direction of the stroke and most of the energy applied to the ball results in speed rather than spin, creating a shot that does not arc much, but is fast enough that it can be difficult to return. A speed drive is used mostly for keeping the ball in play, applying pressure on the opponent, and potentially opening up an opportunity for a more powerful attack.
Loop
Perfected during the 1960s,[4] the loop is essentially the reverse of the speed drive. The racket is much more parallel to the direction of the stroke ("closed") and the racket thus grazes the ball, resulting in a large amount of topspin. A good loop drive will arc quite a bit, and once striking the opponent's side of the table will jump forward, much like a kick serve in tennis.
Counter-hit
The counter-hit is usually a counterattack against drives, normally high loop drives. The racket is held closed and near to the ball, which is hit with a short movement "off the bounce" (immediately after hitting the table) so that the ball travels faster to the other side. A well-timed, accurate counter-drive can be as effective as a smash.
Flick
When a player tries to attack a ball that has not bounced beyond the edge of the table, the player does not have the room to wind up in a backswing. The ball may still be attacked, however, and the resulting shot is called a flip because the backswing is compressed into a quick wrist action. A flip is not a single stroke and can resemble either a loop drive or a loop in its characteristics. What identifies the stroke is that the backswing is compressed into a short wrist flick.
Smash
The offensive trump card is the smash. A player will typically execute a smash when his or her opponent has returned a ball that bounces too high or too close to the net. Smashing consists of using a large backswing and rapid acceleration to impart as much speed on the ball as possible. The goal of a smash is to get the ball to move so quickly that the opponent simply cannot return it. Because the ball speed is the main aim of this shot, often the spin on the ball is something other than topspin. Sidespin can be used effectively with a smash to alter the ball's trajectory significantly, although most intermediate players will smash the ball with little or no spin. An offensive table tennis player will think of a rally as a build-up to a winning smash.
Defensive strokes
Push
The push (or "slice" in Asia) is usually used for keeping the point alive and creating offensive opportunities. A push resembles a tennis slice: the racket cuts underneath the ball, imparting backspin and causing the ball to float slowly to the other side of the table. While not obvious, a push can be difficult to attack because the backspin on the ball causes it to drop toward the table upon striking the opponent's racket. In order to attack a push, a player must usually loop the ball back over the net. Often, the best option for beginners is to simply push the ball back again, resulting in pushing rallies. Against good players, it may be the worst option because the opponent will counter with a loop, putting the first player in a defensive position. Another response to pushing is flipping the ball when it is close to the net. Pushing can have advantages in some circumstances, such as when the opponent makes easy mistakes.
Chop
A chop is the defensive, backspin counterpart to the offensive loop drive.[49] A chop is essentially a bigger, heavier push, taken well back from the table. The racket face points primarily horizontally, perhaps a little bit upward, and the direction of the stroke is straight down. The object of a defensive chop is to match the topspin of the opponent's shot with backspin. A good chop will float nearly horizontally back to the table, in some cases having so much backspin that the ball actually rises. Such a chop can be extremely difficult to return due to its enormous amount of backspin. Some defensive players can also impart no-spin or sidespin variations of the chop.
Block
The block is a simple shot, but nonetheless can be devastating against an attacking opponent. A block is executed by simply placing the racket in front of the ball right after the ball bounces; thus, the ball rebounds back toward the opponent with nearly as much energy as it came in with. This is not as easy as it sounds, because the ball's spin, speed, and location all influence the correct angle of a block. It is very possible for an opponent to execute a perfect loop, drive, or smash, only to have the blocked shot come back at him just as fast. Due to the power involved in offensive strokes, often an opponent simply cannot recover quickly enough, and will be unable to return the blocked shot. Blocks almost always produce the same spin as was received, many times topspin. Depending on the spin of the ball, the block may be returned to an unexpected side of the table. This may come to your advantage, as the opponent may not expect this.
Lob
The defensive lob is possibly the most impressive shot, since it propels the ball about five metres in height, only to land on the opponent's side of the table with great amounts of spin.[50] To execute, a defensive player first backs-off the table 4–6 meters; then, the stroke itself consists of lifting the ball to an enormous height before it falls back to the opponent's side of the table. A lob is inherently a creative shot, and can have nearly any kind of spin. Top-quality players use this to their advantage in order to control the spin of the ball. For instance, though the opponent may smash the ball hard and fast, a good defensive lob could be more difficult to return due to the unpredictability and heavy amounts of the spin on the ball.[50] Thus, though backed off the table by tens of feet and running to reach the ball, a good defensive player can still win the point using good lobs. However, at the professional level, lobbers will lose the point most of the time, so the lob is not used unless it is really necessary.
Effects of spin
Adding spin onto the ball causes major changes in table tennis gameplay. Although nearly every stroke or serve creates some kind of spin, understanding the individual types of spin allows players to defend against and use different spins effectively.[51]
4 phases in a backspin curve
Backspin
Backspin is where the bottom half of the ball is rotating away from the player, and is imparted by striking the base of the ball with a downward movement.[51] At the professional level, backspin is usually used defensively in order to keep the ball low.[52] Backspin is commonly employed in service because it is harder to produce an offensive return, though at the professional level most people serve sidespin with either backspin or topspin. Due to the initial lift of the ball, there is a limit on how much speed with which one can hit the ball without missing the opponent's side of the table. However, backspin also makes it harder for the opponent to return the ball with great speed because of the required angular precision of the return. Alterations are frequently made to regulations regarding equipment in an effort to maintain a balance between defensive and offensive spin choices.[citation needed] It is actually possible to smash with backspin offensively, but only on high balls that are close to the net.
Topspin
The topspin stroke has a smaller influence on the first part of the ball-curve. Like the backspin stroke, however, the axis of spin remains roughly perpendicular to the trajectory of the ball thus allowing for the Magnus effect to dictate the subsequent curvature. After the apex of the curve, the ball dips downwards as it approaches the opposing side, before bouncing. On the bounce, the topspin will accelerate the ball, much in the same way that a wheel which is already spinning would accelerate upon making contact with the ground. Again, the most significant change appears when the opponent attempts to return the ball (with a smooth, pimples inwards rubber). Due to the topspin, the ball jumps upwards and the opponent is forced to compensate for the topspin by adjusting the angle of his or her racket. This is commonly known as "closing the racket". The speed limitation of the topspin stroke is minor compared to the backspin stroke. This stroke is the predominant technique used in professional competition because it gives the opponent less time to respond. In table tennis topspin is regarded as an offensive technique due to increased ball speed, lower bio-mechanical efficiency and the pressure that it puts on the opponent by reducing reaction time. (It is possible to play defensive topspin-lobs from far behind the table, but only highly skilled players use this stroke with any tactical efficiency.) Topspin is the least common type of spin to be found in service at the professional level, simply because it is much easier to attack a top-spin ball that is not moving at high speed.
Sidespin
This type of spin is predominantly employed during service, wherein the contact angle of the racket can be more easily varied. Unlike the two aforementioned techniques, sidespin causes the ball to spin on an axis which is vertical, rather than horizontal. The axis of rotation is still roughly perpendicular to the trajectory of the ball. In this circumstance, the Magnus effect will still dictate the curvature of the ball to some degree. Another difference is that unlike backspin and topspin, sidespin will have relatively very little effect on the bounce of the ball, much in the same way that a spinning top would not travel left or right if its axis of rotation were exactly vertical. This makes sidespin a useful weapon in service, because it is less easily recognized when bouncing, and the ball "loses" less spin on the bounce. Sidespin can also be employed in offensive rally strokes, often from a greater distance, as an adjunct to topspin or backspin. This stroke is sometimes referred to as a "hook". The hook can even be used in some extreme cases to circumvent the net when away from the table.
Corkspin
This type of spin is almost exclusively employed in service, but it is also used from time to time in the lob at the professional level. Unlike any of the aforementioned techniques, corkspin (sometimes referred to as "drill-spin") features a unique situation in which the axis of spin is more or less parallel to the trajectory of the ball. This means that the Magnus effect will have little to no effect on the trajectory of a cork-spun ball. Upon bouncing, the ball will dart right or left, depending on the direction of the spin, making it very difficult to return. Although in theory this type of spin produces the most obnoxious effects, it is not as strategically practical as sidespin or backspin in terms of the limitations that it imposes upon the opponent during their return. Aside from the initial direction change when bouncing, provided that it does not exceed the reach of the opponent, a cork-spun ball is easily countered with topspin or backspin. Similar to a backspin stroke, the corkspin stroke has a lower maximum velocity, simply due to the contact angle of the racket when producing the stroke. To impart a spin on the ball which is parallel to its trajectory, the racket must be swung more or less perpendicular to the trajectory of the ball. This greatly limits the amount of forward momentum that can be transferred to the ball by the racket. Corkspin is almost always mixed with another variety of spin, as it is less effective and harder to produce on its own
Hit
A direct hit on the ball propelling it forward back to the opponent. This stroke differs from speed drives in other racket sports like tennis because the racket is primarily perpendicular to the direction of the stroke and most of the energy applied to the ball results in speed rather than spin, creating a shot that does not arc much, but is fast enough that it can be difficult to return. A speed drive is used mostly for keeping the ball in play, applying pressure on the opponent, and potentially opening up an opportunity for a more powerful attack.
Loop
Perfected during the 1960s,[4] the loop is essentially the reverse of the speed drive. The racket is much more parallel to the direction of the stroke ("closed") and the racket thus grazes the ball, resulting in a large amount of topspin. A good loop drive will arc quite a bit, and once striking the opponent's side of the table will jump forward, much like a kick serve in tennis.
Counter-hit
The counter-hit is usually a counterattack against drives, normally high loop drives. The racket is held closed and near to the ball, which is hit with a short movement "off the bounce" (immediately after hitting the table) so that the ball travels faster to the other side. A well-timed, accurate counter-drive can be as effective as a smash.
Flick
When a player tries to attack a ball that has not bounced beyond the edge of the table, the player does not have the room to wind up in a backswing. The ball may still be attacked, however, and the resulting shot is called a flip because the backswing is compressed into a quick wrist action. A flip is not a single stroke and can resemble either a loop drive or a loop in its characteristics. What identifies the stroke is that the backswing is compressed into a short wrist flick.
Smash
The offensive trump card is the smash. A player will typically execute a smash when his or her opponent has returned a ball that bounces too high or too close to the net. Smashing consists of using a large backswing and rapid acceleration to impart as much speed on the ball as possible. The goal of a smash is to get the ball to move so quickly that the opponent simply cannot return it. Because the ball speed is the main aim of this shot, often the spin on the ball is something other than topspin. Sidespin can be used effectively with a smash to alter the ball's trajectory significantly, although most intermediate players will smash the ball with little or no spin. An offensive table tennis player will think of a rally as a build-up to a winning smash.
Defensive strokes
Push
The push (or "slice" in Asia) is usually used for keeping the point alive and creating offensive opportunities. A push resembles a tennis slice: the racket cuts underneath the ball, imparting backspin and causing the ball to float slowly to the other side of the table. While not obvious, a push can be difficult to attack because the backspin on the ball causes it to drop toward the table upon striking the opponent's racket. In order to attack a push, a player must usually loop the ball back over the net. Often, the best option for beginners is to simply push the ball back again, resulting in pushing rallies. Against good players, it may be the worst option because the opponent will counter with a loop, putting the first player in a defensive position. Another response to pushing is flipping the ball when it is close to the net. Pushing can have advantages in some circumstances, such as when the opponent makes easy mistakes.
Chop
A chop is the defensive, backspin counterpart to the offensive loop drive.[49] A chop is essentially a bigger, heavier push, taken well back from the table. The racket face points primarily horizontally, perhaps a little bit upward, and the direction of the stroke is straight down. The object of a defensive chop is to match the topspin of the opponent's shot with backspin. A good chop will float nearly horizontally back to the table, in some cases having so much backspin that the ball actually rises. Such a chop can be extremely difficult to return due to its enormous amount of backspin. Some defensive players can also impart no-spin or sidespin variations of the chop.
Block
The block is a simple shot, but nonetheless can be devastating against an attacking opponent. A block is executed by simply placing the racket in front of the ball right after the ball bounces; thus, the ball rebounds back toward the opponent with nearly as much energy as it came in with. This is not as easy as it sounds, because the ball's spin, speed, and location all influence the correct angle of a block. It is very possible for an opponent to execute a perfect loop, drive, or smash, only to have the blocked shot come back at him just as fast. Due to the power involved in offensive strokes, often an opponent simply cannot recover quickly enough, and will be unable to return the blocked shot. Blocks almost always produce the same spin as was received, many times topspin. Depending on the spin of the ball, the block may be returned to an unexpected side of the table. This may come to your advantage, as the opponent may not expect this.
Lob
The defensive lob is possibly the most impressive shot, since it propels the ball about five metres in height, only to land on the opponent's side of the table with great amounts of spin.[50] To execute, a defensive player first backs-off the table 4–6 meters; then, the stroke itself consists of lifting the ball to an enormous height before it falls back to the opponent's side of the table. A lob is inherently a creative shot, and can have nearly any kind of spin. Top-quality players use this to their advantage in order to control the spin of the ball. For instance, though the opponent may smash the ball hard and fast, a good defensive lob could be more difficult to return due to the unpredictability and heavy amounts of the spin on the ball.[50] Thus, though backed off the table by tens of feet and running to reach the ball, a good defensive player can still win the point using good lobs. However, at the professional level, lobbers will lose the point most of the time, so the lob is not used unless it is really necessary.
Effects of spin
Adding spin onto the ball causes major changes in table tennis gameplay. Although nearly every stroke or serve creates some kind of spin, understanding the individual types of spin allows players to defend against and use different spins effectively.[51]
4 phases in a backspin curve
Backspin
Backspin is where the bottom half of the ball is rotating away from the player, and is imparted by striking the base of the ball with a downward movement.[51] At the professional level, backspin is usually used defensively in order to keep the ball low.[52] Backspin is commonly employed in service because it is harder to produce an offensive return, though at the professional level most people serve sidespin with either backspin or topspin. Due to the initial lift of the ball, there is a limit on how much speed with which one can hit the ball without missing the opponent's side of the table. However, backspin also makes it harder for the opponent to return the ball with great speed because of the required angular precision of the return. Alterations are frequently made to regulations regarding equipment in an effort to maintain a balance between defensive and offensive spin choices.[citation needed] It is actually possible to smash with backspin offensively, but only on high balls that are close to the net.
Topspin
The topspin stroke has a smaller influence on the first part of the ball-curve. Like the backspin stroke, however, the axis of spin remains roughly perpendicular to the trajectory of the ball thus allowing for the Magnus effect to dictate the subsequent curvature. After the apex of the curve, the ball dips downwards as it approaches the opposing side, before bouncing. On the bounce, the topspin will accelerate the ball, much in the same way that a wheel which is already spinning would accelerate upon making contact with the ground. Again, the most significant change appears when the opponent attempts to return the ball (with a smooth, pimples inwards rubber). Due to the topspin, the ball jumps upwards and the opponent is forced to compensate for the topspin by adjusting the angle of his or her racket. This is commonly known as "closing the racket". The speed limitation of the topspin stroke is minor compared to the backspin stroke. This stroke is the predominant technique used in professional competition because it gives the opponent less time to respond. In table tennis topspin is regarded as an offensive technique due to increased ball speed, lower bio-mechanical efficiency and the pressure that it puts on the opponent by reducing reaction time. (It is possible to play defensive topspin-lobs from far behind the table, but only highly skilled players use this stroke with any tactical efficiency.) Topspin is the least common type of spin to be found in service at the professional level, simply because it is much easier to attack a top-spin ball that is not moving at high speed.
Sidespin
This type of spin is predominantly employed during service, wherein the contact angle of the racket can be more easily varied. Unlike the two aforementioned techniques, sidespin causes the ball to spin on an axis which is vertical, rather than horizontal. The axis of rotation is still roughly perpendicular to the trajectory of the ball. In this circumstance, the Magnus effect will still dictate the curvature of the ball to some degree. Another difference is that unlike backspin and topspin, sidespin will have relatively very little effect on the bounce of the ball, much in the same way that a spinning top would not travel left or right if its axis of rotation were exactly vertical. This makes sidespin a useful weapon in service, because it is less easily recognized when bouncing, and the ball "loses" less spin on the bounce. Sidespin can also be employed in offensive rally strokes, often from a greater distance, as an adjunct to topspin or backspin. This stroke is sometimes referred to as a "hook". The hook can even be used in some extreme cases to circumvent the net when away from the table.
Corkspin
This type of spin is almost exclusively employed in service, but it is also used from time to time in the lob at the professional level. Unlike any of the aforementioned techniques, corkspin (sometimes referred to as "drill-spin") features a unique situation in which the axis of spin is more or less parallel to the trajectory of the ball. This means that the Magnus effect will have little to no effect on the trajectory of a cork-spun ball. Upon bouncing, the ball will dart right or left, depending on the direction of the spin, making it very difficult to return. Although in theory this type of spin produces the most obnoxious effects, it is not as strategically practical as sidespin or backspin in terms of the limitations that it imposes upon the opponent during their return. Aside from the initial direction change when bouncing, provided that it does not exceed the reach of the opponent, a cork-spun ball is easily countered with topspin or backspin. Similar to a backspin stroke, the corkspin stroke has a lower maximum velocity, simply due to the contact angle of the racket when producing the stroke. To impart a spin on the ball which is parallel to its trajectory, the racket must be swung more or less perpendicular to the trajectory of the ball. This greatly limits the amount of forward momentum that can be transferred to the ball by the racket. Corkspin is almost always mixed with another variety of spin, as it is less effective and harder to produce on its own
This game is great
ReplyDeleteWanna play table-tennis
ReplyDeletein the Great Beyond, bro?
1-outta-1 bites-the-dust, bubba.
Follow us Upstairs:
+ en.gravatar.com/MatteBlk +
Cya soon...